|
The Following Page Includes prices for:
Turntables - Tonearms - Record Cleaners - Accessories - HW 19 Parts
Click
here to download price sheet in word document format
- 230 VOLT UNITS WILL ONLY BE SOLD TO
DISTRIBUTORS IN COUNTRIES WITH 230 VOLTS POWER.
- ALL COVERS AND AVAILABLE HW 19 PARTS WILL BE FACTORY DIRECT
(SEE WEBSITE).
- ALL ORDERS LESS THAN $100.00, OR INVOICED REPAIR WORK WILL BE
SENT C.O.D.
- THE FACTORY MUST AUTHORIZE RETURNS FOR REPAIR
OR CREDIT; IF THERE IS NO PRIOR KNOWLEDGE OR. R.A.#, THE SHIPMENT
WILL BE REFUSED.
ORDERS LESS THAN MINIMUM CANNOT BE DISCOUNTED.
MINIMUM ORDER ON HW-16.5 IS 3 PIECES
MINIMUM ORDERS ON SCOUT IS 2 PIECES
HR-X TURNTABLE (25.5W X 19.5D)
|
RETAIL |
HR-X: NEW 12.7
TONEARM, AIR SUSPENSION, SDS, DUAL MOTOR/FLYWHEEL, INVERTED
BEARING, 2” PLATTER, RING, WEIGHT, VW |
12,000.00 |
|
|
HR-X WITH ARMBOARD: NO
ARM, AIR SUSPENSION, SDS, DUAL MOTOR/FLYWHEEL, INVERTED
BEARING, 2”THICK PLATTER, RING, WEIGHT |
9,500.00 |
- 30 LB. SUPER PLATTER ADDS $1500.00 RETAIL
TNT TURNTABLES (25W X 19D)
TNT JUNIOR MK-2 WITH ARM
BOARD: INVERTED BEARING, ISOLATOR FEET, 300 RPM MOTOR,
NO ARM |
2,600.00 |
|
|
TNT JUNIOR MK-2 HOT ROD:
INVERTED BEARING, ISOLATOR FEET, 300 RPM MOTOR,
NO ARM |
2600.00 |
|
|
TNT 6: SDS, AIR,
ARMBOARD, HR-X MOTOR/FLWHEEL, RING/WEIGHT- NO ARM |
7,000.00 |
|
|
TNT-6/JMW-12.7: SAME
AS TNT6 WITH JMW ARM MOUNTED ON ARMBOARD, VW |
9,000.00 |
|
|
TNT-6 HOT ROD/JMW-12.7:
AIR, HR-X MOTOR/FLYWHEEL, RING/WEIGHT, SDS, VW |
9,000.00 |
- THE SUPER PLATTER ADDS 1000.00 RETAIL
REPLACEMENT AND UPGRADE PARTS FOR ALL TNT’s
ITEM# |
ITEM |
RETAIL |
A1201 |
TNT 1,2 DRIVE BELTS (2) |
30.00 |
A1202 |
TNT 2.5, 3, 3.5, 5 DRIVE BELTS
(NO FLYWHEEL)(2) |
30.00 |
A1203 |
TNT 4, OR 5 DRIVE BELTS WITH FLYWHEEL
(4) |
40.00 |
A1204 |
TNT JUNIOR DRIVE BELT (1) |
30.00 |
A1205 |
TNT-6/HR-X DRIVE BELTS (4) |
40.00 |
A1206 |
PERIPHERY RING CLAMP BELTS (2) |
30.00 |
A1207 |
TNT ACRYLIC SUPER ARMBOARD
(DRILLED) |
150.00 |
A1208 |
TNT 1 PIECE SOLID DELRIN CLAMP |
90.00 |
A1209 |
TNT STAINLESS/DELRIN CLAMP |
150.00 |
A1210 |
HR-X RECORD WEIGHT (FITS ALL TABLES) |
150.00 |
A1211 |
HR-X PERIPHERY RING CLAMP (DOES
NOT FIT HW 19, SCOUT, AND
ARIES 1 ) |
600.00 |
A1213 |
HR-X/TNT-6 DUAL MOTOR/FLYWHEEL
ASSEMBLY |
1500.00 |
A1214 |
TNT SINGLE MOTOR/FLYWHEEL ASSEMBLY |
1000.00 |
A1215 |
TNT SINGLE MOTOR /FLYWHEEL DRIVE
BELTS (2) |
30.00 |
A1216 |
HR-X/TNT-4, 5,AND 6 BALL AIR SUSPENSION
UPGRADE |
140.00 |
A1217 |
TNT-1 TO TNT 3.5 BALL AIR SUSPENSION
UPGRADE |
600.00 |
A1218 |
TNT-6 PLATTER AND INVERTED BEARING |
700.00 |
A1219 |
HR-X SUPER PLATTER (30 POUNDS) |
2000.00 |
A1220 |
TNT SUPER PLATTER (25 POUNDS) |
1200.00 |
A1221 |
SPECIAL INVERTED BEARING GREASE |
15.00 |
A1222 |
"MAGIC LUBE" |
25.00 |
REPLACEMENT AND UPGRADE PARTS FOR ARIES
AND SCOUTS
B4001 |
ARIES ARMBOARD DRILLED (+30.00
FOR SME) |
90.00 |
B4002 |
SM, SSM, SCOUT, HW19 AND ARIES
3 DRIVE BELTS (BLK) |
30.00 |
B4004 |
STAINLESS/DELRIN SCREW ON REFLEX
CLAMP |
150.00 |
B4005 |
300 RPM MOTOR/PULLEY/CAPACITOR
(FOR SCOUT) |
150.00 |
B4006 |
ONE PIECE MOTOR/FLYWHEEL FOR ARIES
|
1000.00 |
B4007 |
SCOUT PLATTER AND BEARING |
300.00 |
B4008 |
SUPER PLATTER |
1200.00 |
B4009 |
TNT MINI FEET |
300.00 |
B4010 |
TNT MINI FEET FOR ARIES 1 |
300.00 |
B4011 |
600 RPM MOTOR |
80.00 |
B4012 |
SPECIAL VPI REGULAR BEARING OIL |
15.00 |
A1221 |
SPECIAL VPI INVERTED BEARING GREASE |
15.00 |
A1222 |
"MAGIC LUBE" |
25.00 |
STANDS AND DUSTCOVER
C5001 |
TNT STAND NO TOP PLATE (25 X 19
X 31) |
600.00 |
C5002 |
HR-X TOP PLATE (27 X 21 X 3) (MOTOR
CUTOUT) |
600.00 |
C5003 |
SCOUT AND SCOUTMASTER DUSTCOVER |
60.00 |
C5004 |
SUPER SCOUTMASTER DUSTCOVER |
400.00 |
C5005 |
ARIES DUSTCOVER |
400.00 |
C5006 |
HR-X DUSTCOVER |
500.00 |
ARIES-3 TURNTABLES
|
RETAIL |
ARIES-3 (22WX16D X 6H) NO
ARM |
2900.00 |
|
|
ARIES-3/JMW-9 |
3600.00 |
ARIES-3/JMW-9 SIGNATURE (VW) |
4000.00 |
|
|
ARIES 3/JMW-10.5i (VW) |
4800.00 |
ARIES 3/JMW10.5i w/ SINGLE MOTOR
FLYWHEEL (VW) |
5400.00 |
- THE 25LB. SUPER PLATTER ADDS $1000.00 RETAIL
SCOUT SERIES TURNTABLES
SCOUT – (19W X 14D X 8H) |
RETAIL |
SCOUT/JMW-9 |
1800.00 |
SCOUT/JMW-9 SIGNATURE (VW) |
2200.00 |
| SCOUT/JMW-10.5i NOT AVAILABLE |
N/A |
|
|
SCOUTMASTER – (19W X 14D
X 9H) |
|
SCOUTMASTER/JMW-9 |
2500.00 |
SCOUTMASTER/JMW-9 SIGNATURE (VW) |
2900.00 |
| SCOUTMASTER/JMW-10.5i |
4000.00 |
|
|
SUPER SCOUTMASTER -(22WX14DX9H)
|
|
SSM/JMW-9 SIGNATURE w/ RING, SDS/
(VW) |
6000.00 |
SSM- SAME AS ABOVE WITH SUPER
PLATTER AND TNT-MINI FEET |
7300.00 |
SSM REFERENCE- SAME AS ABOVE WITH
JMW-10.5I TONEARM |
7700.00 |
SSM SIGNATURE- SSM w/ 9 SIGNATURE ARM |
5500.00 |
SSM SIGNATURE RIM DRIVE - SAME AS ABOVE |
6000.00 |
SSM REFERENCE - ABOVE w/ SUPER PLATTER, TNT MINI FEET, 10.5i TONEARM |
7700.00 |
SSM REF. RIM DRIVE - SAME AS ABOVE WITH THE RIM DRIVE |
8300.00 |
- THE 25LB. SUPER PLATTER ADDS $1000.00 RETAIL
JMW MEMORIAL TONEARMS
|
RETAIL |
JMW-9 ARM |
900.00 |
JMW-9 SIGNATURE (VW) |
1400.00 |
|
|
JMW-10.5i ARM (10.5”
LONG) (VW) |
2300.00 |
|
|
JMW-12.7i ARM W/ NEW TAPERED
12: ARMWAND (VW) |
3000.00 |
JMW TONEARM PARTS
|
|
RETAIL |
D1001 |
ARMTUBES FOR JMW-9 |
400.00 |
D1003 |
ARMTUBE FOR JMW-9 SIGNATURE
(VW) |
700.00 |
D1004 |
ARMTUBES FOR JMW-10.5 or
10.5i (VW) |
900.00 |
D1005 |
ARMTUBES FOR JMW-10 |
600.00 |
D1007 |
ARMTUBES FOR JMW-12.7 (VW) |
1500.00 |
D1008 |
ARMTUBES FOR JMW-12.5,12.6
(VW) |
1300.00 |
D1009 |
JMW 9”ALIGNMENT JIG |
40.00 |
D1010 |
JMW 10.5i”ALIGNMENT JIG |
40.00 |
D1011 |
JMW 12.7i”ALIGNMENT JIG |
40.00 |
D1012 |
COUNTERWEIGHT FOR 9’
ARM |
70.00 |
D1013 |
COUNTERWEIGHT FOR 10”
ARM |
80.00 |
D1014 |
COUNTERWEIGHT FOR 12”
ARM |
80.00 |
D1015 |
ANTI-SKATE DEVICE FOR JMW-9, JMW10
|
100.00 |
D1016 |
3 GRAM STAINLESS STEEL HEADSHELL
WEIGHT |
15.00 |
D1017 |
ARM EXTENSION MODIFICATION |
100.00 |
D1018 |
JMW TONEARM DAMPING FLUID |
15.00 |
ACCESSORIES
|
RETAIL |
SDS MOTOR DRIVE-(21X12X9) |
1000.00 |
“THIS IS OUR PROMISE”
– CD |
16.00 |
“THIS IS OUR PROMISE”
–CASSETTE |
10.00 |
REGA VTA ADJUSTMENT BASE |
150.00 |
VPI/GRADO REFERENCE (1.5 mV) - CARTRIDGES
PREMOUNTED
|
|
RETAIL |
G 5001 |
GRADO PLATINUM |
300.00 |
G 5002 |
GRADO SONATA |
500.00 |
G 5004 |
GRADO REFERENCE |
1200.00 |
G 5005 |
GRADO STATEMENT |
2500.00 |
DYNAVECTOR CARTRIDGES
|
|
RETAIL |
F 2003 |
VPI/DYNAVECTOR 1 mV OUT 20X SPECIAL |
700.00 |
DOUBLE SHIELDED VPI TONEARM CABLE (RCA or
XLR)
|
RETAIL |
1 METER |
200.00 |
1.5 METER |
250.00 |
2 METER |
300.00 |
WITH XLR CONNECTORS (ALL LENGTHS) |
+100.00 |
JMW-9 JUNCTION BOXES
|
RETAIL |
JMW- JUNCTION BOX-RCA |
100.00 |
JMW- JUNCTION BOX-RCA (VW) |
200.00 |
JMW- XLR JUNCTION BOX –
BALANCED VAL. (VW) |
300.00 |
RECORD CLEANING MACHINES
|
RETAIL |
HW-16.5 (115 V) (15 1/2
X 14 1/2 X 8) |
540.00 |
HW-16.5 (230V/ CE
VERSION) |
640.00 |
|
|
HW-17 PRO (115 V) (22 X
15 1/4 X 8) |
1300.00 |
HW-17 PRO (230V / CE VERSION)
|
1400.00 |
|
|
HW-27 TYPHOON (115V) (20.5
X 15 .5 X 10) |
2000.00 |
HW-27 TYPHOON (230V / CE VERSION)
|
2100.00 |
PARTS FOR 16.5, 17, AND 27 TYPHOON CLEANING
MACHINES
ITEM # |
ITEM |
RETAIL |
E3000 |
WHITE HOSE CLAMP |
6.00 |
E3001 |
8 OZ. RCM FLUID |
10.00 |
E3002 |
1 OZ. CONCENTRATE RCM FLUID -
MAKES 1 GALLON |
20.00 |
E3004 |
CORK MAT |
12.00 |
E3005 |
45 RPM TUBE AND TUBE HOLDER (
7” RECORDS) |
50.00 |
E3006 |
78 RPM TUBE AND TUBE HOLDER (10”
RECORDS) |
50.00 |
E3007 |
KNURLED BLACK CLAMPING KNOB (16.5
AND 17) |
6.00 |
E3008 |
HW-16.5, 17, 27 VACUUM TUBES (VELVET) |
26.00 |
E3010 |
RECORD CLEANING BRUSH (HW-16,16.5) |
36.00 |
E3011 |
VACUUM MOTOR (HW-16, 16.5) 115V |
120.00 |
E3012 |
VACUUM MOTOR (HW-16, 16.5) 230V |
130.00 |
E3013 |
TURNTABLE MOTOR (HW-16, 16.5)
115V, 230V |
80.00 |
E3015 |
HW-16.5 MOD KIT ( NO COVER) |
70.00 |
E3016 |
HW-16.5 45 RPM KIT (CENTER CLAMP,
VACUUM ASS.) |
70.00 |
E3017 |
HW-16.5 DUSTCOVER (NEW STYLE) |
50.00 |
E3018 |
HW-16.5 DUSTCOVER (OLD STYLE) |
50.00 |
E3117 |
REPLACEMENT BRUSH (HW-17) |
12.00 |
E3118 |
VACUUM MOTOR (HW-17) 115V, 230V |
130.00 |
E3119 |
REVERSIBLE TURNTABLE MOTOR |
90.00 |
E3120 |
HW-17 FLUID PUMP |
120.00 |
E3121 |
HW-17 COMPLETE BRUSH ASSEMBLY
|
60.00 |
E3122 |
HW-17 WASTE HOSE AND CLAMP |
12.00 |
E3123 |
HW-17 DUST COVER |
60.00 |
E3124 |
HW-17 VACUUM TUBE HOLDER WITH
RING |
24.00 |
E3125 |
HW-17 TUBE HOLDER OUTSIDE RING |
6.00 |
E3126 |
HW-17 BRUSH HOLDER (NO BRUSH) |
36.00 |
E3128 |
COMPLETE 45 RPM KIT (7”
DISCS) |
90.00 |
E3129 |
COMPLETE 78 RPM KIT (10”
DISCS) |
72.00 |
E3230 |
HW-27 ACOUSTEK VACUUM MOTOR |
240.00 |
E3231 |
HW-27 COVER |
100.00 |
E3232 |
HW-27 VACUUM TUBE |
26.00 |
E3233 |
HW-27 TUBE AND TUBE HOLDER (12”,
10”, 7”) |
44.00 |
E3234 |
HW-27 TURNTABLE MOTOR |
100.00 |
E3235 |
HW-27 PUMP MOTOR |
120.00 |
E3236 |
HW 27 RECORD CLAMP |
80.00 |
E3237 |
HW-27 BRUSH |
12.00 |
|
