- Demo / Used / Closeout
- >
- Original JMW-3D 12 Used
Original JMW-3D 12 Used
SKU:
$3,000.00
$950.00
$950.00
On Sale
Unavailable
per item
Used Original JMW-3D 12 (300 mm)
Arm Wand Only
Technical Specifics:
Pivot to spindle: 300 mm
Effective length: 313.0 mm
Effective mass: 10.5g.
Overhang: 13mm
Offset angle: 17.37 degrees
Average RMS distortion: 0.267%
Arm Wand Only
Technical Specifics:
Pivot to spindle: 300 mm
Effective length: 313.0 mm
Effective mass: 10.5g.
Overhang: 13mm
Offset angle: 17.37 degrees
Average RMS distortion: 0.267%
Sold out
Minor marks on the head shell from previous cartridge mounting. The finger lift was broken off and sanded down by the previous owner. The arm has a triangular to rounded 3D printed resonance cancelling shape (similar to what can be found on the Fatboy tonearm). All needed accessories included. Canbe mounted on all Classic 4, TNT, HR-X, and Avenger Turntables
Original Description of this arm:
"The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it’s the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.
This revolutionary design utilizes the latest in SolidWorks Software and Finite Element Analysis tools finished in a custom Stereolithography Resin resulting in a tone-arm that noticeably dampens any unwanted device vibration allowing it to transfer flawless sound through its non-crystalline structure. The JMW 3D tone arm is swiftly becoming a staple piece on all turntables whose users value a superior listening experience."
Original Description of this arm:
"The arm looks like a traditional VPI Unipivot arm, except it's made in a 3D printer. The material is basically epoxy, which forms a rigid, lightweight, structure with good insulation properties. Epoxy is non-crystalline which impedes the transfer of vibration, so it’s the perfect material for tone arms. The shape of the tone arm shaft also adds rigidity to the structure and further prevents the transmission of surface vibrations. The result is a low resonance lightweight tone arm.
This revolutionary design utilizes the latest in SolidWorks Software and Finite Element Analysis tools finished in a custom Stereolithography Resin resulting in a tone-arm that noticeably dampens any unwanted device vibration allowing it to transfer flawless sound through its non-crystalline structure. The JMW 3D tone arm is swiftly becoming a staple piece on all turntables whose users value a superior listening experience."