I have a Prime with what appears the junction box is misbehaving.
One post does not seat the cable snugly.
The cable must be juggled to get sound from the speaker.
The other binding post appears not to work at all.
Cabling is snug but no sound.
Can the junction box be the culprit?
Any constructive thoughts will be appreciated.
Thank you.
That sounds frustrating, Robert! A loose connection in the junction box definitely seems like the likely culprit. Before replacing it, double-check your cable ends for any frays or damage. Maybe try swapping cables to isolate the problem further. I've fixed similar electrical gremlins before; sometimes it's just a tiny, hidden break. While troubleshooting, I find listening to some Geometry Dash music helps me focus – the rhythmic beats are strangely calming when dealing with technical issues! Good luck fixing it!
A quick fix might be tightening screws, but replacement could be necessary. Speed Stars
Sounds like a faulty speaker junction box, likely loose connections or a bad binding post. Definitely worth investigating the internal wiring. A quick fix might be tightening screws, but replacement could be necessary. If you enjoy wordplay, try Wordle Unlimited while fixing it.
Hi - not sure about the posts not accepting the cable, but you an always open the junction box and see the cables inside of it. I the 2 screws should just come off and the top comes off.